Resumption of rainfall in parts of Maharashtra has led to a slight uptick in water discharge from the Krishna river and its tributaries.
- Rainfall resumption in Maharashtra has increased reservoir outflow.
- Total discharge from the Krishna river system reached 52,530 cusecs.
- Major dams like Almatti and Raja Lakhamagouda are operating near capacity.
Following the resumption of rainfall in several regions of Maharashtra, authorities have reported a slight increase in the water discharge from state reservoirs on Tuesday. The shift in weather patterns has led to a notable rise in the inflow to major river systems, particularly the Krishna River.
Official data indicates that the total water discharge from the Krishna and its various tributaries in Maharashtra has climbed to 52,530 cusecs. This represents an increase of 1,875 cusecs compared to the discharge levels recorded on Monday. This incremental rise is a direct consequence of renewed precipitation in the upper catchment areas.
Detailed Reservoir Status
The Lal Bahadur Shastri reservoir (Almatti Dam) on the Krishna river has maintained a steady inflow of approximately 30,000 cusecs. The dam currently holds 104 tmcft of live storage, approaching its maximum capacity of 123 tmcft. On Tuesday evening, the inflow was recorded at 30,243 cusecs, while the outflow stood at 24,155 cusecs.
On the Ghataprabha river, the Raja Lakhamagouda dam is operating at a high level, with 48.9 tmcft of water against a total capacity of 51 tmcft. Inflow for this facility was measured at 8,731 cusecs with an outflow of 7,445 cusecs. Meanwhile, the Renuka Sagar dam on the Malaprabha river holds 18.5 tmcft of its 37.73 tmcft capacity.
Why This Matters
BozokMedia analysis shows that even minor fluctuations in reservoir discharge can have cascading effects on downstream water management and flood preparedness in border regions. As the Krishna basin serves multiple states, the synchronization of inflow and outflow is critical for regional water security and agricultural stability.
Monitoring real-time discharge rates is essential to prevent sudden surges that could threaten downstream riparian communities.
| Dam Name | Total Capacity (tmcft) | Current Storage (tmcft) |
|---|---|---|
| Lal Bahadur Shastri (Almatti) | 123 | 104 |
| Raja Lakhamagouda | 51 | 48.9 |
| Renuka Sagar | 37.73 | 18.5 |
Frequently Asked Questions
1. Why is the water discharge increasing in Maharashtra?
The increase is due to the resumption of rainfall in parts of the state, which has increased the inflow to reservoirs.
2. What is the current capacity of the Almatti Dam?
The Almatti Dam has a total capacity of 123 tmcft and is currently holding 104 tmcft.
